arp head studs

B16, B18, B20
 Reply
User avatar

arp head studs

By Benj
- Sun Apr 11, 2010 5:01 pm #186999 ok so today i got my arp head studs in and as im looking at them i notice that 2 are about an inch longer... why and where do these go? the motor is a b18a1 with pr4 head. any help would be great.. oh and kit number is 2084302... lmk thxz



Ben :thumb:
User avatar

By Ajax1989
- Sun Apr 11, 2010 5:16 pm #187005 i believe they go in the top corners of the head, not 100% sure tho
User avatar

By That One Dude
- Sun Apr 11, 2010 7:37 pm #187028 When you go to pull off the head, pay attention to which bolts are longer. Problem solved. :thumb:
User avatar

By Benj
- Sun Apr 11, 2010 9:38 pm #187039
That One Dude wrote:When you go to pull off the head, pay attention to which bolts are longer. Problem solved. :thumb:


it would help if i didnt do a tare down almost 3 years ago
User avatar

By That One Dude
- Sun Apr 11, 2010 9:52 pm #187040 Oohh....good call. The two longer bolts go in the center holes from what I can tell. The corners are the shorter studs, I know that for a fact.

Since it's already torn down, I'd say just set the head on the block with no gasket, and simply thread down the studs by hand to see which ones go where.
User avatar

By Benj
- Sun Apr 11, 2010 10:21 pm #187043
That One Dude wrote:Since it's already torn down, I'd say just set the head on the block with no gasket, and simply thread down the studs by hand to see which ones go where.



Yah that's what I think I'm gonna do
User avatar

By forcefedEG
- Mon Apr 12, 2010 12:30 pm #187176 the long ones are the 2 center ones on a LS... the longest ones go in the center and the rest dont mattter :thumb:
User avatar

By Benj
- Mon Apr 12, 2010 3:12 pm #187212
forcefedEG wrote:the long ones are the 2 center ones on a LS... the longest ones go in the center and the rest dont mattter :thumb:


Thxz man
User avatar

By forcefedEG
- Wed Apr 14, 2010 3:46 pm #187663 no problem :thumb:
 Reply
Return to B Series