help with torque specs

B16, B18, B20
 Reply
User avatar

help with torque specs

By Benj
- Sun May 09, 2010 3:27 am #192657 B18a1 head torque specs. I'm at home and I don't have internet on a computer and my blackberry is slow as hell. Can anyone help?? What's step one and what's step two. If I member correctly first step is 29 ft/lbs and the 2nd is 61ft/lbs can some one confirm this. Thxz
User avatar

By forcefedEG
- Tue May 11, 2010 2:05 pm #193033 Torque in steps: 22ft-lbs (264in-lbs), Then to 63ft-lbs (756in-lbs) (final spec) 94+ Teg
Torque in steps: 22ft-lbs (264in-lbs), Then to 61ft-lbs (732in-lbs)(final spec) 90-93 Teg / B16's
User avatar

By Benj
- Tue May 11, 2010 6:20 pm #193107 thxz dude found my papers then just before i torqued them down. i clued in arp studs different torque specs....


if installing with arp ass. lube equal increments to 80ft/lbs


thxz though
User avatar

By forcefedEG
- Wed May 12, 2010 12:46 pm #193364 yeah arps do have a higher torque spec :hehe:
 Reply
Return to B Series