Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
User avatar
By Honda4life
#195015 So I was wondering if anyone knew how to take the rear window dampers off and install new ones from a 92 Honda civic hatch and how hard is it to do and where I can buy new dampers? Also I went to the dealer just to see how much they are and of course there gonna be hella expensive at Honda $103 for each, crazy :?
User avatar
By teal_dx
#195042 moving this to Chassis- Hatchback since it doesn't really relate to California :thumb:

They come off by loosening the bolts.
Yeah don't do to the local dealership, they'll rape you.

check www.hondaautomotiveparts.com

http://www.hondaautomotiveparts.com/aut ... 5=TAILGATE

$68 each. Junk Yard will be your best deal :thumb:
By MG6
#195172 Got them replaced and yup, OEM is the way to go. Very easy, bolts like Teal said and the new unit will require you to snap the adapter together.

Very easy. Note, the struts are special order, so it might take couple of days but it will come and you will be so happy to install the new unit.
User avatar
By Classiccarsrule85
#195184 every junkyard one i found was crap in the end lasted a month or more two....so i ended up buying a set off ebay new and bolted right in for i think it was 50$$ and they are very freaking strong too.....
User avatar
By 92redrocketHATCH
#195213 would some from an integra hatch work? cause at my junkyard thats what we have closest to hatch, theres one civic hatch and itts stripped
User avatar
By chilango41
#195343 I dont thin integras will work
User avatar
By Classiccarsrule85
#195390 integra =way too long you need ones built just for a civic hatch since there are many different sizes etc.....
By FREDDY1
#195617 Get $ of them and use the extra 2 for hood dampers =]