started the build 56k go away

Turbo and Supercharger discussion
 Reply

By JMan8108
- Thu Aug 09, 2007 3:27 am #19085 And Ive still yet to ride in the boosted single slammer...... My paint is almost done so I'll have to hit you up sometime.
User avatar

By sihatch9508
- Thu Aug 09, 2007 11:52 pm #19201
JMan8108 wrote:And Ive still yet to ride in the boosted single slammer...... My paint is almost done so I'll have to hit you up sometime.


word
User avatar

By sihatch9508
- Mon Aug 13, 2007 4:49 am #19603 so me and my friend were out cruising and we come up behind this ls1 trans am in the turn lane so i throw him a rev. from what i seen it had an exhaust and most likely and intake. so we turn and he gets over when he goes into 2 lanes so i give hime a bov in 3rd gear and then slow down for this car in front of me. going about 40 i drop it into second and then he mats it so i mat it and for that split second for when i build boost he gets a little jump and then once i hit boost i hung door to door with him wrapped out second and then had to slow down cause of another car. so all in all i hung with him and ls1's arent no joke especially when somewhat modded so it made me happy. :D


oh and thanks for the new user title name. 8)
User avatar

By -EJ1- COUPE
- Mon Aug 13, 2007 4:20 pm #19642 thats pretty sick how much boost you on right now?
User avatar

By sihatch9508
- Mon Aug 13, 2007 4:55 pm #19650
H22+LSD-EJ2 wrote:thats pretty sick how much boost you on right now?


6psi
User avatar

By chnzgoofball
- Mon Aug 13, 2007 5:38 pm #19652 6 psi on stock internals??

By JMan8108
- Mon Aug 13, 2007 6:05 pm #19658
chnzgoofball wrote:6 psi on stock internals??

Ill help him out.... yea its a stock z6 with good compression readings across the board. Finally got a ride in this badass boosted hatch the other day and its quite fun to say the least.
User avatar

By chnzgoofball
- Mon Aug 13, 2007 6:22 pm #19659 ooo ok thanks
User avatar

By sihatch9508
- Mon Aug 13, 2007 6:27 pm #19661
JMan8108 wrote:
chnzgoofball wrote:6 psi on stock internals??

Ill help him out.... yea its a stock z6 with good compression readings across the board. Finally got a ride in this badass boosted hatch the other day and its quite fun to say the least.


thanks jordan.

yes. 6psi on stock internals.
User avatar

By york62
- Mon Aug 13, 2007 7:21 pm #19666
sihatch9508 wrote:
JMan8108 wrote:
chnzgoofball wrote:6 psi on stock internals??

Ill help him out.... yea its a stock z6 with good compression readings across the board. Finally got a ride in this badass boosted hatch the other day and its quite fun to say the least.


thanks jordan.

yes. 6psi on stock internals.


pshhhhh!! i had 10...noob. JOKING, its looking good man got any nice finished pics?
User avatar

By sihatch9508
- Mon Aug 13, 2007 7:39 pm #19669
york62 wrote:
sihatch9508 wrote:
JMan8108 wrote:
chnzgoofball wrote:6 psi on stock internals??

Ill help him out.... yea its a stock z6 with good compression readings across the board. Finally got a ride in this badass boosted hatch the other day and its quite fun to say the least.


thanks jordan.

yes. 6psi on stock internals.


pshhhhh!! i had 10...noob. JOKING, its looking good man got any nice finished pics?


yeah i might be turning it up to 8 sometime. but i dont wana do anything too extreme with the stock block.

yeah i have a few cell phone pics:

Image

Image

Image

Image
User avatar

By -EJ1- COUPE
- Mon Aug 13, 2007 8:11 pm #19677 did you paint the middle and polish the end tanks on the intercooler or is it just the pics :?
User avatar

By sihatch9508
- Mon Aug 13, 2007 8:32 pm #19682
H22+LSD-EJ2 wrote:did you paint the middle and polish the end tanks on the intercooler or is it just the pics :?


its just the pics, however i did do a little polishing to the end tanks before i put it on.
User avatar

By chnzgoofball
- Mon Aug 13, 2007 8:35 pm #19684 nice! any plans next? turbo cam?
User avatar

By sihatch9508
- Mon Aug 13, 2007 8:49 pm #19688
chnzgoofball wrote:nice! any plans next? turbo cam?


next plan is building an extra z6 i have in my shed. build the bottom end and head. BBK intake mani with 70mm TB. chipped for an 8k redline running 15psi.


my inspiration..
http://video.google.com/videoplay?docid ... urbo+civic
 Reply
Return to Boost