gsr swap

B16, B18, B20
 Reply
User avatar

gsr swap

By i8umup
- Tue Jun 29, 2010 12:18 pm #202449 hey guys i have a question i have never done a bseries swap i only messed with the h22 so.... basicly the engine i have now the knock sensor is broken im going to replace but beside the oil filter is a big brass looking solonid. i assume that it is the oil pressure switch is this factory cause i have never seen one that look like this http://www.extremepsi.com/store/images//t_21194.jpg
and the harness that came with this car was lengthend like 5 feet for a wire tuck. i can use the d16z6 harness to run this right or do i need the harness off of a b18c? as far as that picture goes if thats not factory does anyone have a factory part number for a oil pressure sensor?

By fallbacdun
- Tue Jul 06, 2010 7:19 pm #203381 ok if i am thinking of this correctly that brass thing is so you can hook up your oil guage inside the car could be mistaken tho.... as far as the harnes I just used my b18c harness and a p28 only thing I had to wire up was vtec being a have a cx...hiope this helps
User avatar

By Eg6H2D
- Wed Jul 07, 2010 12:05 am #203426 37240 PD2 003

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0317486492 :thumb:
 Reply
Return to B Series