Civic-EG.com Forum 3.3.1

- Mon Aug 09, 2010 9:18 pm #208220 as the tittle says, im planning to do this conversion. the kit i have p06 ecu, p28 ecu both auto, complete d16z6 IM, d16z6 engine looms, d16z6 interior looms and d16z6 dizzy.

will the dizzy with into d15b2 head or its restricted for d16z6 only? with this setup, is it just plug and play without any wiring issue or what so ever?

thanks.

- Mon Aug 09, 2010 10:08 pm #208225 you will need a z6 dizzy. something about a sensor or sumthin, iunno my buddy did the swap on his ef and had to swap it out

- Tue Aug 10, 2010 5:14 am #208275

you will need a z6 dizzy. something about a sensor or sumthin, iunno my buddy did the swap on his ef and had to swap it out

didnt i mention i have the dizzy but im not sure if it will fit d15b2 head. any one can share the knowledge please..

thanks.

[suspendedHatch]

- Tue Aug 10, 2010 5:39 pm #208340 The D16Z6 and D15Z1 distributors are unique and will only work on each other but no other Honda engine.

It's not the sensor. It's the housing. You can bolt it up but it doesn't allow enough adjustment to get it within spec timing.

- Sat Aug 14, 2010 1:31 pm #208924

The D16Z6 and D15Z1 distributors are unique and will only work on each other but no other Honda engine.

It's not the sensor. It's the housing. You can bolt it up but it doesn't allow enough adjustment to get it within spec timing.

oh crap, i just bought d15z1 but the dizzy bolted up perfectly ???

- Thu Aug 19, 2010 8:38 pm #209673 @ditoegsaloon
d15b2 have obd0 harness so u can't use obd1 ecu or dizzy from d16z6 unless you convert your harness to obd1.
if you wanna stay with obd0 you'll need ecu and dizzy from d16a6 or similar. u can use d16z6 intake manifold with injectors.