Turbo and Supercharger discussion
By twc2010
#207966 I have a 94 civic dx with a d15b vtec motor. I'm just planning on 5 or 6 psi on my stock motor. Is that okay. If something happens to the motor I'll replace it with a d16z6. The turbo should still fit. I'm getting new injectors and fuel pump and am running a virgin p28 ecu that i plan to get chipped and tuned.
User avatar
By TrailerTrash
#207967 5 or 6psi should be just fine.

You ever consider a Jackson Racing blower instead of a turbo?
By twc2010
#207987 Aren't they alot more expensive. Plus I was told that a turbo is more like free power as a supercharger borrows from power.
User avatar
By TrailerTrash
#207991 Jackson Racing doesn't make setups for single cams anymore so you would have to find a used one on craigslist or something. but you can usually find one for under a grand and if you keep the boost under five pounds you don't have to upgrade anything else on your car or even have it tuned
User avatar
By ikon
#208421
TrailerTrash wrote:5 or 6psi should be just fine.

You ever consider a Jackson Racing blower instead of a turbo?


im running a jrsc on a d15b vtec on 8 psi....... AND I LOVE IT. the immediate boost is so much fun. sure you dnt have the high horsepower gains as a turbo but u have the reliability and dependability as a stock motor with no lag....... do it.
By VerLee24
#208425 for a d15 i'd say supercharger just because the rods arent as thick as the z6 rods. so a stock block wouldnt do much better with a turbo anyways..

or you could pull the d15 right now for a back up motor incase you blow the z6.

also psi isnt relevant to the life of a motor. 6 psi with a gt30 would explode but 6 psi with a kkk wouldn't give you anything. (exageration for point of emphasis) motors break depending on horsepower not boost levels.
Last edited by VerLee24 on Wed Aug 11, 2010 4:05 pm, edited 1 time in total.
User avatar
By ikon
#208460 also psi isnt relevant to the life of a motor. 6 psi with a gt30 would explode but 6 psi with a kkk wouldn't give you anything. (exageration for point of emphasis) motors breaking depend on horsepower not boost levels.[/quote]

not wht i was sayin. its the setup if a supercharger that gives it its reliability. not the psi. :thumb:
User avatar
By d-mon
#208472
VerLee24 wrote:for a d15 i'd say supercharger just because the rods arent as thick as the z6 rods.

jdm d15b vtec has d16 rods.
stock d16 bottom ends can take 220+hp.
if you want bigger numbers, vitara builds can take more than double that.
User avatar
By ikon
#208477
VerLee24 wrote:wasn't singling you out ikon. it was for the OP.. said he wanted 5 or 6 psi on a stock motor.


no prob man...... my fault
By VerLee24
#208527
d-mon wrote:
VerLee24 wrote:for a d15 i'd say supercharger just because the rods arent as thick as the z6 rods.

jdm d15b vtec has d16 rods.
stock d16 bottom ends can take 220+hp.
if you want bigger numbers, vitara builds can take more than double that.


should've searched first. you're right. http://www.turbod16.com/viewtopic.php?t ... efc1c48820

"so with that bombshell" jeremy clarkson

turbo it! http://fjdistributors.com/product_info. ... cts_id=395