Civic-EG.com Forum 3.3.1

- Mon Jan 24, 2011 1:52 pm #235142 ok i've do some looking and i can't find any d15 rod that a reinforced for a good n/a build, or should i just use new oem rod or just redo the ones i have?

[teal_dx]

- Mon Jan 24, 2011 3:21 pm #235154 are you talking about the JDM D15B or the USDM D15b7?

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Jan 26, 2011 2:56 am #235441 usdm b15b7

- Wed Jan 26, 2011 11:09 am #235503 ONLY option for stock length forged rods for the d15b7 at this time is crower and they are pricey. $700 a set.

Straight lines are for sissies.

- Wed Jan 26, 2011 2:08 pm #235519 so i should just have the rods redone or go buy a set of oem rod?
what do oem rods run price wise?

- Wed Jan 26, 2011 10:54 pm #235596 stock rods will be fine for any na d15 build you can get your oem rods hardened at any machine shop

my build> blue bandit-sold=[
http://civic-eg.com/viewtopic.php?p=203107#203107
taco build!
http://civic-eg.com/viewtopic.php?t=17613

- Thu Jan 27, 2011 12:21 am #235628 sweet thanks guys