D15, D16, D17 and Mini-Me swaps
User avatar
By 603 jdm
#243684 was wondering if anyone could help me figure out how to do the timing belt and water pump on my 93 dx with the d15b7.
User avatar
By HatchbackCrusader
#243687 Whats up, I just did mine not too long ago. It's not too hard if you're mechanically inclined. But its VERY IMPORTANT that you set the timing EXACTLY on point or you could bend your valves. (I screwed up and had to do it all over, but luckily mine is ok).

Heres the DIY I followed:
http://honda-tech.com/showthread.php?t=649277

It's for a Del Sol, but the same rules apply. If you get stuck on anything, I'll be more than happy to help you through it.
User avatar
By 603 jdm
#243898 thank ya, im gonna be checking out the water pump and the belt this weekend.
User avatar
By Eg6H2D
#243914
HatchbackCrusader wrote:Whats up, I just did mine not too long ago. It's not too hard if you're mechanically inclined. But its VERY IMPORTANT that you set the timing EXACTLY on point or you could bend your valves. (I screwed up and had to do it all over, but luckily mine is ok).

Heres the DIY I followed:
http://honda-tech.com/showthread.php?t=649277

It's for a Del Sol, but the same rules apply. If you get stuck on anything, I'll be more than happy to help you through it.


You guys do know we have a DIY section here right? :lol:
User avatar
By Eg6H2D
#243915 Man that thread didnt even tell you to put the motor at TDC just incase something moves i the process pffff!!!
User avatar
By Eg6H2D
User avatar
By 603 jdm
#243959 i knew to have it at TDC. i gota finish the body ork and stuff then im goin over the motor and tranny.