what all is neededto put a d16z6 intake manifold on to my b7

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

By teal_dx
- Mon Mar 14, 2011 1:27 pm #243830 its a direct swap, just unbolt the d15b7, transfer over the sensors to the d16z6 and bolt it on :thumb:

port-matching will help with better flow but is not essential if you can't do it now.
User avatar

By kt95CiviCDX
- Mon Mar 14, 2011 9:22 pm #243894 so which gaskets would i use with it for a b7 or a z6 ?
User avatar

By Eg6H2D
- Mon Mar 14, 2011 10:58 pm #243913
kt95CiviCDX wrote:so which gaskets would i use with it for a b7 or a z6 ?



Intake manifold gasket for a Z6
User avatar

By kt95CiviCDX
- Tue Mar 22, 2011 1:05 am #245311 and for the throttle body would i use the z6 or b7 ? and do i need to use any sealant on the gaskets ?
User avatar

By Ajax1989
- Tue Mar 22, 2011 1:09 am #245313 either or

there the same

i put a z6 manifold on my b7, using my b7 sensors and throttle body
User avatar

By kt95CiviCDX
- Tue Mar 22, 2011 1:15 am #245315 i forgot to add that i meant the gasket for the throttle body...and will the b7 injectors fit the z6 injector seals ?
User avatar

By teal_dx
- Tue Mar 22, 2011 2:21 am #245327
kt95CiviCDX wrote:i forgot to add that i meant the gasket for the throttle body...and will the b7 injectors fit the z6 injector seals ?

Yep the injectors will fit :thumb:
 Reply
Return to D Series