Civic-EG.com Forum 3.3.1

- Wed Mar 16, 2011 3:56 am #244178 Well my head is on it's way home

I updated the first post with this info....

D16Z6 Head:

Mild Port and Polish
3 angle valve job
SuperTech springs, new oem retainers
New oem cam and valve seals
Milled .003 for flatness
Hondata intake gasket
Freshly cleaned Z6 injectors
All Done by Performance Porting http://www.performanceporting.com/

Time to start getting the block lined out

[Ajax1989]

- Wed Mar 16, 2011 3:59 am #244179 cant wait

- Wed Mar 16, 2011 4:25 pm #244260 I use to get so pumped up reading others build threads, now to have the chance to have my own and it's pretty dang cool

- Thu Mar 24, 2011 12:26 am #245782 Look what came in the mail today: AEM fuel rail, FPR, and gauge from 1Meanbitch


And my injectors all minty fresh from PPorting


And a quick test fit of both on my Z6 mani


cam seal for my camless head

Last edited by Zen Chameleon on Tue Aug 16, 2011 11:26 pm, edited 1 time in total.

- Thu Mar 24, 2011 12:27 am #245783

Last edited by Zen Chameleon on Tue Aug 16, 2011 11:36 pm, edited 1 time in total.

[Ajax1989]

- Thu Mar 24, 2011 12:59 am #245787

nice

- Thu Mar 24, 2011 2:26 am #245794 Pure Sickness! i Like!!!

Team XXX Racing/WGHonda
My Build Thread EG#1 --> http://civic-eg.com/viewtopic.php?p=115 ... ht=#115778
EG#2--> http://civic-eg.com/viewtopic.php?t=23264
H2D--> http://civic-eg.com/viewtopic.php?t=192 ... ght=#19294

- Thu Mar 24, 2011 3:10 am #245806 Thankz guys! I did some painting today aswell that I may share later too

- Tue Mar 29, 2011 7:01 pm #246973 Got a package:

Y/Z6, ARP head studs, used but never seen a heat cycle.


Glowshift oil pressure gauge and sending unit.


And I've done a little painting but it still needs some finish work.


I also have a Z6 AEM cam gear on it's way.

Little by little the update are

Last edited by Zen Chameleon on Tue Aug 16, 2011 11:38 pm, edited 1 time in total.

[Ajax1989]

- Tue Mar 29, 2011 7:09 pm #246975 nice!!!

keep em coming

- Tue Mar 29, 2011 7:33 pm #246981

nice!!!

keep em coming

Will do, slow and steady!

- Mon Apr 04, 2011 4:20 am #248134 Not new or abused, Z6 cam gear:

Last edited by Zen Chameleon on Tue Aug 16, 2011 11:41 pm, edited 1 time in total.

- Thu Apr 07, 2011 10:29 pm #249001 Here's what came in the mail today from Diller (member of DSO). This thing is barely used and the filter is like new:

And he tossed in a Vstack for little to nothing, so I figured why not.

:TU:

Last edited by Zen Chameleon on Tue Aug 16, 2011 11:43 pm, edited 1 time in total.

- Thu Apr 14, 2011 9:45 pm #250451 Not much of an update. Hondata intake mani gasket:

Last edited by Zen Chameleon on Tue Aug 16, 2011 11:44 pm, edited 1 time in total.

- Tue Apr 19, 2011 1:10 am #251059 I had somebody on another forum ask if I planned to "gasket match" the Hondata gasket, I said no and this is why:

Roof

right side

left side

Pretty flush where it counts

then I held it on the intake mani

Looks good enough to me

Last edited by Zen Chameleon on Tue Aug 16, 2011 11:46 pm, edited 1 time in total.