Ebay manifold

Turbo and Supercharger discussion
 Reply
User avatar

By RSuave
- Sat May 14, 2011 5:57 pm #255219 I heard to stay away from those manifolds, and ebay brand can end up costing you more in the end. If you do upgrades pay the extra cash.
User avatar

By forcefedEG
- Sat May 14, 2011 6:47 pm #255226 Those things aren't good at all they crack in 6months or less, I'm running the blox cast manifold and iove it, most good quality cast manifolds Wont give any trouble..... but that's just my .02
User avatar

By kingjmack
- Sun May 15, 2011 2:14 pm #255325
JUICE wrote:the cast ones are usable.. it's the stainless ones that are complete garbage


Yep. The cast one's should be good. On the stainless one's, you hear alot of people complain about welds breaking, then you have the one odd person who has had no trouble out of theirs.

Every once in a blue moon, someone will say the cast manifolds like this
Image
aren't any good because the waste gate only sees exhaust from one runner.
User avatar

By eg_on_93
- Wed May 18, 2011 9:46 am #255719 agreed thanks for the info javascript:emoticon(':thumb:')

By AutoXCivic
- Thu May 19, 2011 11:31 pm #255954
kingjmack wrote:
JUICE wrote:the cast ones are usable.. it's the stainless ones that are complete garbage


Yep. The cast one's should be good. On the stainless one's, you hear alot of people complain about welds breaking, then you have the one odd person who has had no trouble out of theirs.

Every once in a blue moon, someone will say the cast manifolds like this
Image
aren't any good because the waste gate only sees exhaust from one runner.


From what I've heard when you start getting into higher boost the waste gate placement on those can be problematic. But for a good solid street set up ... shouldn't be a problem.
 Reply
Return to Boost