D15, D16, D17 and Mini-Me swaps
By unclecivic
#262111 I have a VX hatch that has the 7 wire O2 sensor, but a 7 wire sensor is wayyy too much money for me. :x ( thats why I'm drivin a busket... )
anyway- I picked up a 4 wire sensor, but I can't figure out how to wire it up - I still have a CEL on.
Any idea on which wires to hook to what?
The new sensor has 2 white wires, 1 grey and 1 black. Which wires would they get connected to? :?
User avatar
By d-mon
#262130 you have just opened a can of worms.
the vx ecu wants a wide band o2, not the narrow band 4 wire o2.
its easier and cheaper to replace with the correct o2 than do some head/engine/ecu swapping.
User avatar
By RWMIII
#262152 VX WHT - 4 Wire BLK
VX YEL - 4 Wire GRY
VX ORG - 4 Wire WHT
The other WHT needs a 12V+ ECU switched source. It can be tapped into nearly any YEL/BLK wire under the hood.

google: 5 wire to 4 wire o2 conversion
User avatar
By suspendedHatch
#262154 That doesn't apply to what he's doing.

That ECU requires the "7 wire" wideband O2. It has an onboard controller for it. You can convert to a CA ECU and four wire O2 sensor, but that would cost more than just getting the correct O2. Plus you'll lose some fuel economy.

Don't hack up those wires. Even if you're going to convert it, you'll need to run all new wires. Most of the wires on the wideband don't even go to the ECU.
By unclecivic
#262163 Please pardon my OP- I didn't include all the needed info- The HARNESS is from the VX- I put a mini me-D15B7/D16Z6 in the car- I'm running a P-28 ECU so- is the O2 swap do-able under these circumstances?
Big thanks for helping me out too.
User avatar
By RWMIII
#262166
unclecivic wrote:Please pardon my OP- I didn't include all the needed info- The HARNESS is from the VX- I put a mini me-D15B7/D16Z6 in the car- I'm running a P-28 ECU so- is the O2 swap do-able under these circumstances?
Big thanks for helping me out too.


Yes it is possible. Here is a link on the topic and how to do it.

http://hondaswap.com/swap-articles/vx-5 ... nfo-13759/

(yes the link says 5 wire, but it has the pinouts and wire colors needed to convert on a P28 with a VX harness)
By unclecivic
#262168 Great link man, Thx. :thumb:
Where you at in Fla? I left Port Saint Lucie back in '05.
Cruisin the NE nowadaze.
User avatar
By RWMIII
#262170
unclecivic wrote:Great link man, Thx. :thumb:
Where you at in Fla? I left Port Saint Lucie back in '05.
Cruisin the NE nowadaze.


down in the Central Region. Ocala to be exact, just north of Orlando. Looking to leave this area as soon as I get the chance :thumb:
By unclecivic
#262448 Oh my.. Ocala = crickets chirping.
:woot:
JK
back when Clinton was gettin hummers in the oval office there wasn't a damn thing goin on in ocalackie. ' least the east coast had betties in thongs on the beaches. :thumb:
Florida cops were down on the trees tho, so I had to split to a more user-friendly location.
User avatar
By suspendedHatch
#263398 Hey, your assumption was correct after all. Makes a big difference when you get all the information.
User avatar
By 94EJ2
#263410
unclecivic wrote:Great link man, Thx. :thumb:
Where you at in Fla? I left Port Saint Lucie back in '05.
Cruisin the NE nowadaze.



nebraska why would you want to come here theres nothing but corn everywhere lol
By unclecivic
#263512 I'm not cruisin the corn rows, I'm in the North East. Sry for the confusion. But you are correct - I do not wish to go to Nebraska.
By unclecivic
#263513
suspendedHatch wrote:Hey, your assumption was correct after all. Makes a big difference when you get all the information.

No doubt- my mistake for leaving out the important parts !
User avatar
By RWMIII
#263518
unclecivic wrote:I'm not cruisin the corn rows, I'm in the North East. Sry for the confusion. But you are correct - I do not wish to go to Nebraska.
:lol: :lol: :lol: :lol:

sooo....hows the corn 94EJ2?