Civic-EG.com Forum 3.3.1

- Wed Feb 02, 2011 5:49 am #236605 hey guys i have a d16y7 im swapping into my 92 cx hatch, i picked it up for 200 buks and its in rly good shape, everything with the engine is obd2, now i have obd1 intake,dizzy and ecu oh and motor mounts, thats everything i would need to swap it in right? its out of a 97 sedan

"Gota get that vroom, vroom, pow!"

- Thu Nov 10, 2011 6:26 am #280951 I got the same exact setup. It has good pwr BUT, tranny sucks, to long of a gear. I am gonna go boosted anyway but if your gonna go n/a I recommend Si tranny off top. When I shift from gear 2 gear it drops way below my powerband. but when it does get to pwr band it pulls cool...

kesone 559

- Thu Nov 10, 2011 4:00 pm #280980 Sounds like you pretty much have everything man! Good luck!

95 civic hatch z6 single slammer!

- Thu Nov 17, 2011 3:53 am #281731 If you keep your original head and swap bottom ends its a bolt on affair....if you use the y7 hed your gonna have to swap dizzy guts. I just did this to my car but I kept the z6 head I had from my mini me swap. I just happen to see that during my research. GL.