yet another d16y8 swap post

D15, D16, D17 and Mini-Me swaps
 Reply

yet another d16y8 swap post

By ccornewell
- Mon Nov 21, 2011 1:34 am #282218 Ok, I have a chance to get a d16y8 engine for a good deal. can I put my obd1 sensors from my b7 into my y8? Im wanting to eventually run 5 psi of boost above 3000 rpm in my daily driver. This will not be a track car. I just like turning wrenches. Any info is appriceated.
User avatar

By teal_dx
- Mon Nov 21, 2011 3:41 am #282233 So you'll be running the y8 in a 92-95 civic? If so then yes. Use your D15b7 harness, dizzy, injectors and probably throttle body and run a p28 ecu. then chip it and you'll be ready for a fine tune when you go turbo :thumb:

By ccornewell
- Mon Nov 21, 2011 4:23 pm #282291 I already have a P06 ECU. Can I use it?

By ccornewell
- Mon Nov 21, 2011 6:00 pm #282297 Thanks for the info but I've decided not to get that great deal of a y8. I found out that the engine is hydro locked.
 Reply
Return to D Series