Civic-EG.com Forum 3.3.1

- Thu Mar 15, 2012 9:34 pm #298390 almost every time when i make a right turn my car would honk. some honk are more noticable then other honk. idk what is wrong with it. im using the nrg quick release also. what do you guys think?

- Fri Mar 16, 2012 1:34 am #298414 maybe the horn wire is grounding against the hub or other wire in the hub

- Fri Mar 16, 2012 3:04 am #298427

maybe the horn wire is grounding against the hub or other wire in the hub :?

that's what i was thinking too but today i unplug the fuse under the hood for the horn and replug back in, it didnt honk anymore -_- weird

- Tue Mar 27, 2012 11:50 am #299972 have you fitted an aftermarket wheel recently?

- Wed Mar 28, 2012 5:10 am #300106 no i havent. i just unplug the horn under the dash until i find another solution.

- Wed Mar 28, 2012 5:26 am #300109 I'm sure I have the solution. I'm guessing you weren't the one who installed the NRG quick release? The contact that is constantly touching the hub of the steering wheel seems to be loose. The contact is loose and touches the metal center of the steering wheel when you start to turn, which would make the horn go off. Take apart the steering wheel hub and locate the metal contact and secure it down. I used some rubber bands when I installed my NRG quick release. They seem to be holding up quite well, and I've never had any issues. Just be sure that the metal contact is well secure and is not loose.

- Wed Mar 28, 2012 1:29 pm #300136 when I had that mine was honkin at people in bus stops haha...

- Wed Mar 28, 2012 3:46 pm #300149

I'm sure I have the solution. I'm guessing you weren't the one who installed the NRG quick release? The contact that is constantly touching the hub of the steering wheel seems to be loose. The contact is loose and touches the metal center of the steering wheel when you start to turn, which would make the horn go off. Take apart the steering wheel hub and locate the metal contact and secure it down. I used some rubber bands when I installed my NRG quick release. They seem to be holding up quite well, and I've never had any issues. Just be sure that the metal contact is well secure and is not loose.

im going to try this, thank you

when I had that mine was honkin at people in bus stops haha...

lolllllllll the reaction to some pple face is priceless

- Wed Mar 28, 2012 3:49 pm #300150 ha I looked like a fuckin tool I reckon!

- Thu Mar 29, 2012 4:40 am #300254 How's it looking? Is the issue fixed?