Civic-EG.com Forum 3.3.1

- Fri Sep 21, 2012 4:55 am #316150 I dont have an adjustable timing gear yet but I need to get my car running how bad will the timing affect the engine being half a tooth off?

Thanks in advance guys

[teal_dx]

- Fri Sep 21, 2012 12:49 pm #316168 Did you use the z6 head?

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Sep 21, 2012 4:31 pm #316182 yup its a z6 head everything is ready to just get get dropped into the car.

- Mon Sep 24, 2012 7:03 pm #316362 any help guys? I have done some research and some say it wont be too bad and others say dont run it at all. im at a loss

- Mon Sep 24, 2012 7:20 pm #316365 you might have to adjust the distributor to minimize the affects of the half tooth. what is your full motor

1988 civic sedan - granny car MPG'S http://civic-eg.com/viewtopic.php?t=27768

1994 civic hatch - BECAZ RACEKAR http://civic-eg.com/viewtopic.php?t=27511

- Mon Sep 24, 2012 7:24 pm #316366 is it d15 with z6 or is it a zc with z6? what exactly do you have?

1988 civic sedan - granny car MPG'S http://civic-eg.com/viewtopic.php?t=27768

1994 civic hatch - BECAZ RACEKAR http://civic-eg.com/viewtopic.php?t=27511

[teal_dx]

- Mon Sep 24, 2012 7:42 pm #316369 I say you've come this far, drop $100 on the cam gear and do it right the first time. Or I think there's a D series OEM cam gear that you can use instead to get that 1/2 tooth back.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Tue Sep 25, 2012 5:41 am #316410 it's a d15 block with a z6 head, I am trying to rake as many monies as i can but im taking way too many classes at school and I can barley get by. what do you guys think ?

Teal: I am going to do research and see if there is a stock cam gear I can use.

Thanks in advance again guys.