Civic-EG.com Forum 3.3.1

- Thu Jan 10, 2013 3:11 am #323655 where can i find parts for the rebuild and/or performance parts?my goal also for the turbo is to get around 300hp

[teal_dx]

- Thu Jan 10, 2013 4:06 am #323664 I'd look into ARP head studs, Forged Rods, Forged Pistons (or at least vitaras), along with all of the OEM goodies for a full rebuild (gaskets, seals, oil pump depending on mileage) and bearings.

OEM stuff can be found at the dealer or anywhere online if you want to use off brand parts. The performance parts can also be found at most online vendors. A good place to start is our trusted sponsor, http://www.corsportusa.com/

I would start by deciding what parts I want to use that are in my price range and then google to see who sells those parts.

For example "Eagle Rods" (I noticed that Corsport didn't carry those)

Also I hope you're building the JDM D15b, not the USDM D15b7.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

[Apexracing]

- Thu Jan 10, 2013 5:10 am #323676

I'd look into ARP head studs, Forged Rods, Forged Pistons (or at least vitaras), along with all of the OEM goodies for a full rebuild (gaskets, seals, oil pump depending on mileage) and bearings.

OEM stuff can be found at the dealer or anywhere online if you want to use off brand parts. The performance parts can also be found at most online vendors. A good place to start is our trusted sponsor, http://www.corsportusa.com/

I would start by deciding what parts I want to use that are in my price range and then google to see who sells those parts.

For example "Eagle Rods" (I noticed that Corsport didn't carry those)

Also I hope you're building the JDM D15b, not the USDM D15b7.

Love corsport, i've spent a ton of money there and their customer service is the best i've dealt with in a while.