Civic-EG.com Forum 3.3.1

- Fri Mar 15, 2013 8:18 pm #328681 any way to get this out without breaking it? and if i have no choice whats it called so i can replace it or is there a way to work around it?

- Fri Mar 15, 2013 8:39 pm #328684 pretty sure thats the PCV valve socket. why do you want to remove it?

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Fri Mar 15, 2013 9:45 pm #328689

pretty sure thats the PCV valve socket. why do you want to remove it?

this, why remove it, are you running a turbo?

BUILT NOT BOUGHT!!

- Sat Mar 16, 2013 4:56 am #328699 sorry for not saying i just bought the z6 intake but it was broken was tryin to remove it and put on the one from my b7

- Sat Mar 16, 2013 11:44 am #328705 if you are removing it, just trim the lugs off the top and push it down over.

BUILT NOT BOUGHT!!

- Sat Mar 16, 2013 2:31 pm #328717 thanks for the posts i popped it out with a flat head