Omni Lower Control Arms

Springs, Struts, Swaybars, Bushings, Tower Braces & more
 Reply

Omni Lower Control Arms

By littledelsol
- Thu Oct 26, 2006 9:23 pm #405 I just installed Omni Rear lower control Arms (the bronze ones, not the new ones)on my Del Sol Vtec. I have a stock sway bar and I can seem to bolt it up to the control arms. Am I doing something wrong or is the a trick to it?
User avatar

By teal_dx
- Fri Oct 27, 2006 2:21 am #408 any way you can take a pic to show how far away or close it is to lining up? If you need me to host it, PM me

By littledelsol
- Fri Oct 27, 2006 6:28 pm #409 I already removed them and didnt take a pic. I am going to buy some Omni's new LCAs that have that have the tab for the sway bar, kinda look like the Skunk 2 LCAs. THANKS
User avatar

By Jsa-SIR2
- Mon Mar 12, 2007 11:04 pm #3001 do omni do a set for Jdm eg6? if so how much?
User avatar

By EG6Driver
- Tue Apr 03, 2007 4:58 pm #4609
Jsa-SIR2 wrote:do omni do a set for Jdm eg6? if so how much?


If I remember correctly, Omni has LCA's for the 92-95 chassis period. I don't know if there are differences in the way they mount between JDM and USDM.
User avatar

By boxcarracer0260
- Wed Apr 04, 2007 8:45 am #4685
EG6Driver wrote:
Jsa-SIR2 wrote:do omni do a set for Jdm eg6? if so how much?


If I remember correctly, Omni has LCA's for the 92-95 chassis period. I don't know if there are differences in the way they mount between JDM and USDM.

the jdm lca's allow the rear struts to have shock like bottom mounts not the us designed fork....as far as i know i have never seen any aftermarket lca's for jdm models...i had the same set up on my eg for some time but switch over because i could not find the parts.
User avatar

By vtec_gloucester
- Wed Apr 04, 2007 1:36 pm #4705 i was looking for after market lca's a while back and found now1 does them for the sir!

but my coilovers came with an "add on" bit for the fork design so i can change from the eye or fork when ever i please... well, until i throw them away thinking i didnt need them!!! lol.

most sir owners ive spoke to have just up-graded to ITR lca's - thats what im gunna do... but im gunna get them shot blasted and painted red to make them look abit bling bling. lol



teal - i'll see if i can get a pic for you.
User avatar

By vtec_gloucester
- Wed Apr 04, 2007 1:42 pm #4706 this is all i could get but you can see that the eye conection sits inside the lca. HTH

Image
User avatar

By vtec_gloucester
- Wed Apr 04, 2007 1:46 pm #4708 and this is the fork adaptor thing i was on about.

Image
 Reply
Return to EG Chassis Suspension