- Sat Aug 23, 2008 3:43 pm
#67109
I should have made my first try at powder coating with a bracket or something small, but I did my Valve Cover instead. I went with Bronze Metallic. I think it turned out ok for my first try ever powder coating. There are a few places that did not turn out perfect, maybe a second coat will help
Hot Coat system from Eastwood
Prepped Valve Cover
Right out of the oven
Outside
Did a second coat, Came out much better. Now to decide on sanding the letters or painting them red
Sanded the letters.
I did the Power steering pump bracket and the trans mount satin black and I did my air intake Bronze. I set the valve cover on the D15B and it looks pretty cool.
Hot Coat system from Eastwood

Prepped Valve Cover




Right out of the oven


Outside



Did a second coat, Came out much better. Now to decide on sanding the letters or painting them red




Sanded the letters.

I did the Power steering pump bracket and the trans mount satin black and I did my air intake Bronze. I set the valve cover on the D15B and it looks pretty cool.



Last edited by sqsi on Sun Aug 31, 2008 12:56 am, edited 3 times in total.