Dash Seats, Steering Wheels etc... If it's inside your Civic then it's in here.
By subie
#83955 Hi guys,, i'm very new to the forum and just bought very first EG hatch,

so, does anyone know if i could take this centre console surround off ?? and how ??

I'm talking about the grey plastic thingy that surrounding the radio and aircon switches (see pic below)

Thanks in advance guys

Cheers
By subie
#83956 here's the pic :

Image

Cheers
User avatar
By jmsplitfyre
#83960 I think you can take that off, but that's a big part that also goes over the steering wheel to the dimmer/mirror switches..
By subie
#83964 Yep, that's big part and i knew, it can be taken off but i don't know how (lol)

can anyone show me how ??

Cheers
User avatar
By egsedanguy
#84011 when i took mine off i broke it like a dip shit. there is about 12 screws holding it on from the back. you will have to take the dash out to remove it. you can get behind some the areas to remove the screw. just no hand room. i ended up putting a new one on and used some high strength apoxy and just glued it back on. looks and fits fine. i can hang from it its on the so tight. sorry if this dont help good luck.
User avatar
By ls4doordx
#84044
egsedanguy wrote:when i took mine off i broke it like a dip shit. there is about 12 screws holding it on from the back. you will have to take the dash out to remove it. you can get behind some the areas to remove the screw. just no hand room. i ended up putting a new one on and used some high strength apoxy and just glued it back on. looks and fits fine. i can hang from it its on the so tight. sorry if this dont help good luck.


x2 i just did that same thing yup whole dash has to come out good luck :thumb:
By subie
#84056 NO, NO, NO, NO, don't wanna hear this !!! :cry: :cry:

gotta be some how to take it off without the whole dash out ???

Cheers
User avatar
By egsedanguy
#84077
hannibalhekki wrote:damn i guess you and i are screwed! mine's broken where the radio goes. is it hard to take out the dash?




um i dont know. not to bad. need 2 ppl and you might wanna check to find a diagram on how to remove. if its broke. break it off. then you can remove the screws. buy a new one and were the screws go you can fill with apoxy glue. find something that is fast dry so it doesnt sag and fall off. youl know what im talking bout when you take it off. o and if you havent priced them yet. your lokking at bout 100 bucks. i got mine used and was 40. i just sanded and painted black. came out tits.