D Series ITB's need help

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

By Dippin_EG
- Wed Jan 21, 2009 10:03 pm #91274 From what i know. there is very little support for individual throttle bodies on d-series. you would probally need to get a custom setup. it also requires alot of head work, tuning, and such to see any real results. hope this helps a little :D
User avatar

By colpitts
- Wed Jan 21, 2009 10:07 pm #91276 try looking for throttle bodies off of some of the old honda sportsbikes. iknow the CBR 954 throttle body works on the B18... at least i think its the B18.. anyone?
User avatar

By hatchin06
- Wed Jan 21, 2009 10:25 pm #91284 I have seen alot of people make there own.
User avatar

By teal_dx
- Wed Jan 21, 2009 10:33 pm #91285 http://www.google.com/search?hl=en&fkt= ... h&aq=f&oq=

Not much talk on this site yet about ITB's

There was a member selling a set on here a while back... I wanna say it was rice2nice or rice2niceEG his name is Joe. Met him a few times, good guy to buy from :thumb:

ps, changing the topic of your thread from "need help" to "D16 ITB's"
so anyone who wants to discuss ITB's will pay attention to your thread.
Someone didn't read the stickied posts in the newbie section :wink:
User avatar

By colpitts
- Fri Jan 23, 2009 4:49 am #91763 if you go the sportbike throttle body route post some info ...... actually, post your info either way.. im interested to see what you come up with.. but i definitely think you should check a cycle salvage yard, you could come up with a nice set of ITB's for next to nothing whereas new ones are crazy $$ , like 2000 plus tax shipping .... bisimoto wants 3000 for their new top feed ones.. NUTS
User avatar

By suspendedHatch
- Fri Jan 23, 2009 2:55 pm #91837 There's a company that makes them, but they're very pricey. I don't remember the company's name but you can find them on onecamonly.com

The first thing you need to have is engine management. No software based on the factory ECU is capable of alpha-N based fueling. So you'll need a Motec or an AEM EMS. With ITB's, the response is so fast and there's no plenum, so MAP sensors are utterly useless.

Driveability suffers a bit on TPS based calibrations btw. Hey, but it makes you cool!
User avatar

By hondajunkee
- Fri Jan 23, 2009 3:27 pm #91848
teal_dx wrote:http://www.google.com/search?hl=en&fkt=4355&fsdt=6386&q=d16+itb&btnG=Google+Search&aq=f&oq=

Not much talk on this site yet about ITB's

There was a member selling a set on here a while back... I wanna say it was rice2nice or rice2niceEG his name is Joe. Met him a few times, good guy to buy from :thumb:

ps, changing the topic of your thread from "need help" to "D16 ITB's"
so anyone who wants to discuss ITB's will pay attention to your thread.
Someone didn't read the stickied posts in the newbie section :wink:


Yeah i bought those ITB's of him, they were great. I think he knew someone who makes them but I'm not 100% Dirka would know better then me.

I coulda sworn that i posted in this thread before :?
User avatar

By ohDirka
- Fri Jan 23, 2009 11:32 pm #91976
hondajunkee wrote:
teal_dx wrote:http://www.google.com/search?hl=en&fkt=4355&fsdt=6386&q=d16+itb&btnG=Google+Search&aq=f&oq=

Not much talk on this site yet about ITB's

There was a member selling a set on here a while back... I wanna say it was rice2nice or rice2niceEG his name is Joe. Met him a few times, good guy to buy from :thumb:

ps, changing the topic of your thread from "need help" to "D16 ITB's"
so anyone who wants to discuss ITB's will pay attention to your thread.
Someone didn't read the stickied posts in the newbie section :wink:


Yeah i bought those ITB's of him, they were great. I think he knew someone who makes them but I'm not 100% Dirka would know better then me.

I coulda sworn that i posted in this thread before :?



If I'm not mistaken those were off of a Honda CBR929rr or CBR954rr either way they were basically a bolt on I think but you have to make do some welding to fit the injectors. Rice2nice bought them like 5 years ago before any company made them for d-series.
User avatar

By hondajunkee
- Fri Jan 23, 2009 11:37 pm #91980
D15kid wrote:
hondajunkee wrote:
teal_dx wrote:http://www.google.com/search?hl=en&fkt=4355&fsdt=6386&q=d16+itb&btnG=Google+Search&aq=f&oq=

Not much talk on this site yet about ITB's

There was a member selling a set on here a while back... I wanna say it was rice2nice or rice2niceEG his name is Joe. Met him a few times, good guy to buy from :thumb:

ps, changing the topic of your thread from "need help" to "D16 ITB's"
so anyone who wants to discuss ITB's will pay attention to your thread.
Someone didn't read the stickied posts in the newbie section :wink:


Yeah i bought those ITB's of him, they were great. I think he knew someone who makes them but I'm not 100% Dirka would know better then me.

I coulda sworn that i posted in this thread before :?



If I'm not mistaken those were off of a Honda CBR929rr or CBR954rr either way they were basically a bolt on I think but you have to make do some welding to fit the injectors. Rice2nice bought them like 5 years ago before any company made them for d-series.


yeah they were 929's, but they were to small for my Z6. they would have worked great on a B7, but you need atleast cbr1000's for enough air for the Z6
User avatar

By colpitts
- Sun Jan 25, 2009 12:12 am #92175 ha, i was close anyways. thanks for the info
 Reply
Return to D Series