Hardcorehonda *Dutch coupe* "almost typeR"

Technical Topics specific to the 2 dr. coupe body - NOT where you post pics/build specs of your car.
 Reply
User avatar

By stefan
- Thu May 31, 2007 3:16 pm #9193 Getting decent things to Holland is:
OR (very) expensive,
OR not possible.

So we have to do a lot ourselves.

Also, unfortunately, these hubs are DC2, and a S2k brake disc clicks right into place on a EG6 hub.
All you have to do then is redrill the discs so they match with the 4 holes in the hub itself.
For those who don't know; the DC2 ITR has another offset, wich is why HH had to grind of some material from his hubs.
HH, correct me if I'm wrong tho, only reproducing what I've read recently ;)

By hardcorehonda
- Thu May 31, 2007 4:33 pm #9216
stefan wrote:Getting decent things to Holland is:
OR (very) expensive,
OR not possible.

So we have to do a lot ourselves.

Also, unfortunately, these hubs are DC2, and a S2k brake disc clicks right into place on a EG6 hub.
All you have to do then is redrill the discs so they match with the 4 holes in the hub itself.
For those who don't know; the DC2 ITR has another offset, wich is why HH had to grind of some material from his hubs.
HH, correct me if I'm wrong tho, only reproducing what I've read recently ;)


Thata alomost correct... the offset is not why i'm milling the hubs..
The eg6 hubs are smaller in diameter.. they are also thinner.. thats where the offset difference come's into view.

The DC2 hubs are milled to the right diameter so the rotors will fit now..
But i need to check the DC2hub/EP1s2k rotor offset combo...
I maybe need to shim the rotors or mod the caliper.
But first things first......
User avatar

By chnzgoofball
- Thu May 31, 2007 6:50 pm #9238
hardcorehonda wrote:
chnzgoofball wrote:nice show us some pics when u get the brakes in!! :thumb:


that can take a while..... i need 16" rims to clear the calipers and rotors.

i would figure hahaha stock s2k rims are 16 so i would figure u had to get 16 to fit those brakes but i cant wait to see and hear how the improvement would be hahhaa :thumb: :lol:
User avatar

By projecthonda
- Fri Jul 20, 2007 9:25 am #15848 i love the first pic,, very nice presentation :thumb:
User avatar

By Rice2NiceEG
- Fri Jul 20, 2007 4:17 pm #15950 I'm lovin it!
User avatar

By Sire
- Sun Jul 22, 2007 4:06 am #16144
Fastfwd wrote:hoi :thumb:


x2 :D
User avatar

By stefan
- Fri Sep 07, 2007 7:19 am #22513 Haha :D

How's the brakes coming along mate?

By hardcorehonda
- Sun Sep 09, 2007 1:59 pm #22751
stefan wrote:Haha :D

How's the brakes coming along mate?


i have been lazy like a MOFO.... done nothing to the car.
Only new oil en some new front tires.

Last week i finally put in the momo Swheel.
Had to cut and trim the OEM plastic to accomodate the Hub.
PFFF what normally takes 10 minutes ,turns out to be a 1,5 hour job..

OHHH ....and i really need to wash the car... wuahaha
User avatar

By stefan
- Mon Sep 10, 2007 10:05 pm #22858 Lazy ass :D

Why didn't you go to the FCT meet last sunday anyway, weather wasn't that bad :)
User avatar

By smokinsoljah420
- Sat Sep 06, 2008 1:30 am #68535 F-ING SWEET DUDE! my dream setup!!!! ::drool::
User avatar

By Lt.DudeEJ1
- Sat Sep 06, 2008 2:10 am #68538 Sweet ride dude i hope my EJ looks that good some day.
User avatar

By Ecc0
- Sat Sep 06, 2008 8:38 am #68559 Dude this coupe is sweet I love the 5stud conversion and the wheels really set it off nicely.

Great to see more of our Dutch buddys joining up too :thumb:
 Reply
Return to Chassis - Coupe