Civic-EG.com Forum 3.3.1

- Thu Feb 26, 2009 7:49 pm #99160 I have a 93 hatch automatic and im dropping a b16a2 in the car i need a list of all the parts i need please thank you.

Parts i have:
b16a2 motor tranny
b16a2 wire harness
b16a2 axles
b16a2 ecu


do i need to change the DASHBOARD wire harness?

- Thu Feb 26, 2009 9:24 pm #99171 Search, there is tons of information on this site

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718

- Thu Feb 26, 2009 9:27 pm #99173 welcome fellow ohioian

you'll also need motor mounts
also are you switching from auto to manual?

wiring maybe based on the model/year of your hatch

- Thu Feb 26, 2009 10:29 pm #99180 Yeah its going from auto to manual

- Thu Feb 26, 2009 10:34 pm #99182 then you will also need one of these

http://cgi.ebay.com/ebaymotors/92-93-94 ... enameZWDVW

- Thu Feb 26, 2009 10:54 pm #99194 u'll also need shift linkage and shifter.

95 lx sedan
88 rx7 base sold
93 del sol swapped b16a2-R.I.P
i'm addicted to 8200 rpms
"car inspection, what's that"
STDs cause you to fart lighting bolts.

- Fri Feb 27, 2009 3:43 am #99270 i have the b16a2 motor mounts i cant use those? and the shift linkage i have. i just need to know if i need to get the dashboard wire harness from a integra and what year?

- Fri Feb 27, 2009 7:03 am #99301 get integra mounts from a 95 up
u should be able 2 use the same dash harness but u will need to wire the vtec if u dont already have it

what did the motor come out of ???????

- Fri Feb 27, 2009 5:57 pm #99354 It came from a 2000 civic si...
I have integra shift linkage
so i need to get integra motor mounts?
which mounts do i need or do i need all of them?

- Fri Feb 27, 2009 7:41 pm #99367 also i do have the jdm b16a mounts too

- Fri Feb 27, 2009 7:42 pm #99368 how do i do the vtec line?

- Fri Feb 27, 2009 7:44 pm #99369

how do i do the vtec line?

this forum does have a search function ya know.

in for chance is a homo club membership

you have to believe it to be in it

true story

#3 Member of CHANCE is HOMO club

- Fri Feb 27, 2009 8:05 pm #99371 well im kind of new to this so i didnt really know im a noob....i need to know just the electrically things need done to the car....like the wire harness.

- Sat Feb 28, 2009 6:12 am #99444 [b]go here http://www.rywire.com/store/index.php and give them a call they can help you with any kind of wiring you need and they make wire kits for cheap i think you want to talk to Peter i think thats his name but there all good guys [/b]

EG GSR

- Sat Feb 28, 2009 6:44 am #99447 from this website do i have to get the subharness or the whole replacement?