Civic-EG.com Forum 3.3.1

- Sat May 07, 2011 11:43 pm #254191 I got a question about the swap i'm doing? i'm got a 92 vx hatch and i'm swaping a 95 d16z6 in. I was just wondering if it is as easy as drop the d15 out and drop the d16 in. I already got a p28. Any help is appreciated

[Ajax1989]

- Sun May 08, 2011 12:07 am #254192 its as easy as it sounds

pull the d15 out and put the d16 in and hook up the p28 and start her

- Sun May 08, 2011 12:09 am #254193 pretty much plug and play, but u would need to get a 4 wire O2 sensor for the Z6.

- Sun May 08, 2011 12:33 am #254195 I don't think vx's are prewired for vtec
you might have to wire in vtec which is
vtec oil pressure sensor
vtec selenoid....
right

[Ajax1989]

- Sun May 08, 2011 1:07 am #254197

I don't think vx's are prewired for vtec
you might have to wire in vtec which is
vtec oil pressure sensor
vtec selenoid....
right

the vx is vtec

well vtec-e

[chrono404]

- Sun May 08, 2011 1:11 am #254199

I don't think vx's are prewired for vtec
you might have to wire in vtec which is
vtec oil pressure sensor
vtec selenoid....
right

the vx is vtec

well vtec-e

x2

Just have to get a EX/Si Wiring harness and an OBD1 p28 ECU. That should take care of the wiring. Otherwise you need to convert your harness from a 5 wire o2 Sensor to a 4 Wire o2 Sensor.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Sun May 08, 2011 1:22 am #254200 right....well nvm then

Last edited by OleFolk on Sun May 08, 2011 3:10 am, edited 1 time in total.

[Ajax1989]

- Sun May 08, 2011 1:58 am #254207

I don't think vx's are prewired for vtec
you might have to wire in vtec which is
vtec oil pressure sensor
vtec selenoid....
right

x2

Just have to get a EX/Si Wiring harness and an OBD1 p28 ECU. That should take care of the wiring. Otherwise you need to convert your harness from a 5 wire o2 Sensor to a 4 Wire o2 Sensor.

the vx has the d15z1 which is vtec
the only thing that might need to be wired is the o2 sensor
vtec is already wired

- Sun May 08, 2011 2:34 am #254208 pretty sure thats how it was. thanks guys