Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
User avatar
By blue_eg
#30336 Getting a black dash..
just wondering how hard it is to take my old one out and swap in the new one....

anyone got a write up for this yet??
User avatar
By hondajunkee
#30337 the only thing hard is making it legal since the vin number is on the dash, and your not allowed to just swap them over
User avatar
By Gorveatt
#30338
hondajunkee wrote:the only thing hard is making it legal since the vin number is on the dash, and your not allowed to just swap them over


Swap the VIN tag's :thumb: lol
User avatar
By blue_eg
#30339 yeah about that i cant keep the old vin off my old dash???

i totaled my hatch last year and the dash broke in like six places but everything still lines up.. i had another dash i was goin to put in it last year but sold it for profit... hehe :D

what do i have to do to do it "LEGALY" hoe much of a big deal is it..
User avatar
By blue_eg
#30340
Gorveatt wrote:
hondajunkee wrote:the only thing hard is making it legal since the vin number is on the dash, and your not allowed to just swap them over


Swap the VIN tag's :thumb: lol



def my thoughts.. who will know :?
User avatar
By hondajunkee
#30341 im not 100% sure but i think you can keep your old vin, some one on here did a teg dash on there eg and theres a ton of info on it in that thread
User avatar
By blue_eg
#30342
hondajunkee wrote:im not 100% sure but i think you can keep your old vin, some one on here did a teg dash on there eg and theres a ton of info on it in that thread


ill look it up
thanks if you can find the link that would be great..
User avatar
By -EJ1- COUPE
#30344 its like 8 bolts. 2 on each side when you open the door under that little cover. the middle vent near the windshield there is a bolt under that. take the shroud under the steering wheel off and there is one or 2 there. and one under the glovebox i think thats it. not 100% :thumb:
User avatar
By teal_dx
#30345 drop the steering column for some extra room, otherwise it is a tight fit over the steering wheel. You only have to loosen 2 bolts under the dash to swing the column down.
User avatar
By JLau
#30346 http://honda-tech.com/zerothread?id=600430

This is what I used. You can just use a screw driver to punch out the two fasteners for the vin tag. I swapped the tags and it looks perfect.
User avatar
By blue_eg
#30380 thanks for the help guys hopefully can get this done in a few hours.. doesnt seem as hard as i thought...
User avatar
By asianrob
#30402 i changed dash in my teg and just swapped it over :lol:
User avatar
By yashep
#30416 My dash rattle a lot from the pot holes on the streets and for the everyday use. I took it out and put black selicone around the edges and now it doesn't sound like before.Try using this, is what I use to remove mine:
http://clubeg6.com/forum/viewtopic.php?t=5491
:thumb:
User avatar
By blue_eg
#30455
yashep wrote:My dash rattle a lot from the pot holes on the streets and for the everyday use. I took it out and put black selicone around the edges and now it doesn't sound like before.Try using this, is what I use to remove mine:
http://clubeg6.com/forum/viewtopic.php?t=5491
:thumb:





thank you soooo much... very good write up..
By egg1
#202130
blue_eg wrote:Getting a black dash..
just wondering how hard it is to take my old one out and swap in the new one....

anyone got a write up for this yet??


you have to drill out the revit from the vin and then use a chisel to hit it out. i think they sell black revit at car paint store (ppg).dont get the chrome looking one cop will know. good luck